diff --git a/src/NerdMinerV2.ino.cpp b/src/NerdMinerV2.ino.cpp
index 9904d15..95a4359 100644
--- a/src/NerdMinerV2.ino.cpp
+++ b/src/NerdMinerV2.ino.cpp
@@ -11,6 +11,7 @@
 #include "mining.h"
 #include "monitor.h"
 #include "drivers/displays/display.h"
+#include "drivers/storage/SDCard.h"
 
 //3 seconds WDT
 #define WDT_TIMEOUT 3
@@ -25,9 +26,10 @@
   OneButton button2(PIN_BUTTON_2);
 #endif
 
-
 extern monitor_data mMonitor;
 
+SDCard SDCrd = SDCard();
+
 /**********************⚡ GLOBAL Vars *******************************/
 
 unsigned long start = millis();
diff --git a/src/drivers/devices/esp32CAM.h b/src/drivers/devices/esp32CAM.h
index 39d4391..2949491 100644
--- a/src/drivers/devices/esp32CAM.h
+++ b/src/drivers/devices/esp32CAM.h
@@ -27,8 +27,8 @@
 // (default SPI unit provided by <SPI.h>)
 // setup SPI pins.
 #define SDSPI_CS    13
-// The following pins will be ignored, if a tft display is set up. (!defined NO_DISPLAY)
-// check display settings to find the appropriate lines. 
+// The following pins can be retreived from the TFT_eSPI lib, 
+// if a display that is using it is activated.
 #define SDSPI_CLK   14
 #define SDSPI_MOSI  15
 #define SDSPI_MISO  2
diff --git a/src/drivers/storage/SDCard.cpp b/src/drivers/storage/SDCard.cpp
index 48a5c73..89eb984 100644
--- a/src/drivers/storage/SDCard.cpp
+++ b/src/drivers/storage/SDCard.cpp
@@ -1,4 +1,3 @@
-
 #include <FS.h>
 #include <ArduinoJson.h>
 #include <WiFi.h>
@@ -7,6 +6,7 @@
 #include "nvMemory.h"
 #include "..\devices\device.h"
 #include  "SDCard.h"
+//#include "..\lib\TFT_eSPI\User_Setup_Select.h"
 
 #if defined (BUILD_SDMMC_1) || defined(BUILD_SDMMC_4)
 #include <SD_MMC.h>
@@ -17,19 +17,43 @@
 
 #if defined (BUILD_SDMMC_1) || defined(BUILD_SDMMC_4) || defined (BUILD_SDSPI)
 
-SDCard::SDCard()
+/// @param int ID only relevant in SPI mode, if you want to use a non standard SPI Unit.
+SDCard::SDCard(int ID):cardInitialized_(false),cardBusy_(false)
 {
 #if defined (BUILD_SDMMC_1) || defined(BUILD_SDMMC_4)
     iSD_ = &SD_MMC;
 #elif defined (BUILD_SDSPI)
-    ispi_ = &SPI;
+    if(ID>=0)
+    {
+        ispi_ = new SPIClass(ID);
+        newInstance_ = true;
+    }
+    else
+    {
+        ispi_ = &SPI;
+        newInstance_ = false;
+    }
     iSD_ = &SD;
 #endif // interface type
+initSDcard();
 }
 
 SDCard::~SDCard()
 {
-    unmount();
+    iSD_->end();
+    if(newInstance_) 
+    {
+        ispi_->end();
+        delete ispi_;
+    }
+    Serial.println("SDCard: Unmounted");  
+}
+
+/// @brief Check if the card is accessed right now.
+/// @return true if active
+bool SDCard::cardBusy()
+{
+    return !cardBusy_;
 }
 
 /// @brief Transfer settings from config file on a SD card to the device.
@@ -54,7 +78,7 @@ bool SDCard::loadConfigFile(TSettings* Settings)
     // Load existing configuration file
     // Read configuration from FS json
 
-    if (initSDcard())
+    if (cardAvailable())
     {
         if (iSD_->exists(JSON_CONFIG_FILE))
         {
@@ -62,15 +86,16 @@ bool SDCard::loadConfigFile(TSettings* Settings)
             File configFile = iSD_->open(JSON_CONFIG_FILE, "r");
             if (configFile)
             {
+                cardBusy_ = true;
                 StaticJsonDocument<512> json;
                 DeserializationError error = deserializeJson(json, configFile);
                 configFile.close();
+                cardBusy_ = false;
                 Serial.println("SDCard: Loading config file");
-                serializeJsonPretty(json, Serial);
-                Serial.print('\n');
-                unmount();
                 if (!error)
                 {
+                    serializeJsonPretty(json, Serial);
+                    Serial.print('\n');
                     Settings->WifiSSID = json[JSON_KEY_SSID] | Settings->WifiSSID;
                     Settings->WifiPW = json[JSON_KEY_PASW] | Settings->WifiPW;
                     Settings->PoolAddress = json[JSON_KEY_POOLURL] | Settings->PoolAddress;
@@ -98,82 +123,71 @@ bool SDCard::loadConfigFile(TSettings* Settings)
         {
             Serial.println("SDCard: No config file available!");
         }
-        unmount();
     }
     return false;
 }
 
-void SDCard::unmount()
+/// @brief Check if a SD card is inserted.
+/// @return true if inserted.
+bool SDCard::cardAvailable()
 {
-    iSD_->end();
-#ifdef BUILD_SDSPI_SETUP
-    ispi_->end();
-#endif // BUILD_SDSPI_SETUP 
-    Serial.println("SDCard: Unmounted");
-}
-
-bool SDCard::initSDcard()
-{
-    if (iSD_->cardType() != CARD_NONE)
-    {
-        Serial.println("SDCard: Already mounted.");
-        return true;
-    }
-    Serial.println("SDCard: Mounting card.");
-
-    bool cardInitialized = false;
-#if defined (BUILD_SDMMC_4)
-    if (iSD_->cardType() == CARD_NONE)
-    {
-        iSD_->setPins(SDMMC_CLK, SDMMC_CMD, SDMMC_D0, SDMMC_D1, SDMMC_D2, SDMMC_D3);
-        cardInitialized = iSD_->begin("/sd", false);
-        Serial.println("SDCard: 4-Bit Mode.");
-    }
-#elif defined (BUILD_SDMMC_1)
-    #warning SDMMC : 1 - bit mode is not always working. If you experience issues, try other modes.
-    if (iSD_->cardType() == CARD_NONE)
-    {
-        iSD_->setPins(SDMMC_CLK, SDMMC_CMD, SDMMC_D0);
-        cardInitialized = iSD_->begin("/sd", true);
-        Serial.println("SDCard: 1-Bit Mode.");
-    }
-#elif defined (BUILD_SDSPI)
-    if (iSD_->cardType() == CARD_NONE)
-    {
-        #ifdef BUILD_SDSPI_SETUP
-        ispi_->end();
-        ispi_->begin(SDSPI_CLK, SDSPI_MISO, SDSPI_MOSI, SDSPI_CS);      
-        #endif //BUILD_SDSPI_SETUP
-        cardInitialized = iSD_->begin(SDSPI_CS, *ispi_);
-        Serial.println("SDCard: SPI mode.");
-    }
-#else
-    Serial.println("SDCard: interface not available.");
-    return false;
-#endif // dataPinsDefined
-    if (cardInitialized)
+    if (cardInitialized_)
     {
         if (iSD_->cardType() != CARD_NONE)
         {
-            Serial.println("SDCard: Mounted.");
+            Serial.println("SDCard: Inserted.");
             return true;
         }
         else
         {
-            Serial.println("SDCard: Mounting failed.");
-            iSD_->end();
+            Serial.println("SDCard: Not inserted.");
         }
     }
+    else
+    {
+        Serial.println("SDCard: Interface not initialized.");
+    }
     return false;
 }
 
+/// @brief Init SD card interface. Normaly not required, as this is called by the constructor.
+/// @return  true on success
+bool SDCard::initSDcard()
+{
+    if (!cardAvailable())
+    {
+        Serial.println("SDCard: init SD card interface.");
+#if defined (BUILD_SDMMC_4)
+        iSD_->setPins(SDMMC_CLK, SDMMC_CMD, SDMMC_D0, SDMMC_D1, SDMMC_D2, SDMMC_D3);
+        cardInitialized_ = iSD_->begin("/sd", false);
+        Serial.println("SDCard: 4-Bit Mode.");
+    }
+#elif defined (BUILD_SDMMC_1)
+#warning SDMMC : 1 - bit mode is not always working. If you experience issues, try other modes.
+        iSD_->setPins(SDMMC_CLK, SDMMC_CMD, SDMMC_D0);
+        cardInitialized_ = iSD_->begin("/sd", true);
+        Serial.println("SDCard: 1-Bit Mode.");
+    }
+#elif defined (BUILD_SDSPI)
+        ispi_->begin(SDSPI_CLK, SDSPI_MISO, SDSPI_MOSI, SDSPI_CS);
+        cardInitialized_ = iSD_->begin(SDSPI_CS, *ispi_);
+        Serial.println("SDCard: SPI mode.");
+    }
+#else
+    Serial.println("SDCard: interface not defined.");
+    return false;
+#endif // dataPinsDefined
+    cardAvailable();
+    return cardInitialized_;
+}
+
 #else
 
-SDCard::SDCard() {}
+SDCard::SDCard(int ID) {}
 SDCard::~SDCard() {}
 void SDCard::SD2nvMemory(nvMemory* nvMem, TSettings* Settings) {};
 bool SDCard::loadConfigFile(TSettings* Settings) { return false; }
 bool SDCard::initSDcard() { return false; }
-void unmount() {}
+bool SDCard::cardAvailable() { return false; }
 
 #endif //BUILD_SDMMC
\ No newline at end of file
diff --git a/src/drivers/storage/SDCard.h b/src/drivers/storage/SDCard.h
index 37d0bd4..775adbb 100644
--- a/src/drivers/storage/SDCard.h
+++ b/src/drivers/storage/SDCard.h
@@ -9,46 +9,62 @@
 
 // select interface and options according to provided pins
 #if defined (SDMMC_D0) && defined (SDMMC_D1) && defined (SDMMC_D2) && defined (SDMMC_D3)
-#define BUILD_SDMMC_4
-#undef BUILD_SDMMC_1
-#undef BUILD_SDSPI
-#include <SD_MMC.h>
-#warning SD card support in 4-Bit mode enabled!
+    #define BUILD_SDMMC_4
+    #undef BUILD_SDMMC_1
+    #undef BUILD_SDSPI
+    #include <SD_MMC.h>
+    #warning SD card support in 4-Bit mode enabled!
 #elif defined (SDMMC_D0) && !(defined (SDMMC_D1) && defined (SDMMC_D2) && defined (SDMMC_D3))
-#define BUILD_SDMMC_1
-#undef BUILD_SDMMC_4
-#undef BUILD_SDSPI
-#include <SD_MMC.h>
-#warning SD card support in 1-Bit mode enabled!
+    #define BUILD_SDMMC_1
+    #undef BUILD_SDMMC_4
+    #undef BUILD_SDSPI
+    #include <SD_MMC.h>
+    #warning SD card support in 1-Bit mode enabled!
 #elif defined (SDSPI_CS)
-#undef BUILD_SDMMC_1
-#undef BUILD_SDMMC_4
-#define BUILD_SDSPI
-#if defined (SDSPI_CLK) && defined (SDSPI_MOSI) && defined (SDSPI_MISO) && defined (NO_DISPLAY)
-#define BUILD_SDSPI_SETUP
-#endif // SPIPINS
-#include <SPI.h>
-#include <SD.h>
-#warning SD card support in SPI mode enabled!
+    #undef BUILD_SDMMC_1
+    #undef BUILD_SDMMC_4
+    #define BUILD_SDSPI
+
+    #include <SPI.h>
+    #include <SD.h>
+    #include "..\lib\TFT_eSPI\User_Setup_Select.h"
+
+    #ifndef NO_DISPLAY
+        #if !defined(SDSPI_CLK) && defined(TFT_CLK)
+            #define SDSPI_CLK TFT_CLK
+        #endif // SDSPI_CLK
+        #if !defined(SDSPI_MOSI) && defined(TFT_MOSI)
+            #define SDSPI_MOSI TFT_MOSI
+        #endif // SDSPI_MOSI
+        #if !defined(SDSPI_MISO) && defined(TFT_MISO)
+            #define SDSPI_MISO TFT_MISO
+        #endif // SDSPI_MISO
+    #elif !defined(SDSPI_CLK) || !defined(SDSPI_MOSI) || !defined(SDSPI_MISO)
+        #error: Please define SDSPI pins!
+    #endif // NO_DISPLAY
+    
+    #warning SD card support in SPI mode enabled!
 #endif
 
-// Handles the transfer of settings from sd card to nv memory (wifi credentials are handled by wifimanager)
 class SDCard
 {
 public:
-    SDCard();
+    SDCard(int ID=-1);
     ~SDCard();
     void SD2nvMemory(nvMemory* nvMem, TSettings* Settings);
     bool loadConfigFile(TSettings* Settings);
+    bool cardAvailable();
+    bool cardBusy();
 private:
     bool initSDcard();
-    void unmount();
-
+    bool cardInitialized_;
+    bool cardBusy_;
 #if defined (BUILD_SDMMC_1) || defined(BUILD_SDMMC_4)
     fs::SDMMCFS* iSD_;
 #elif defined (BUILD_SDSPI)
     SPIClass* ispi_;
     fs::SDFS* iSD_;
+    bool newInstance_;
 #endif
 };
 
diff --git a/src/wManager.cpp b/src/wManager.cpp
index bd89146..41ebff3 100644
--- a/src/wManager.cpp
+++ b/src/wManager.cpp
@@ -27,6 +27,8 @@ extern monitor_data mMonitor;
 
 nvMemory nvMem;
 
+extern SDCard SDCrd;
+
 void saveConfigCallback()
 // Callback notifying us of the need to save configuration
 {
@@ -87,7 +89,6 @@ void init_WifiManager()
     if (!nvMem.loadConfig(&Settings))
     {
         //No config file on internal flash.
-        SDCard SDCrd;
         if (SDCrd.loadConfigFile(&Settings))
         {
             //Config file on SD card.